Containers

воскресенье, 1 апреля 2018 г.

46 Best Gipsy Wagon Design Ideas to Inspire you

Best Gipsy Wagon Design Ideas To Inspire You 42

You also wish to choose the opportunity to view because many designs as possible, don’t just chose the first one which you see. Some designs depict gypsies since they looked many centuries past, in traditional garb.

Logo design is an essential component of brand development and branding makes up a significant part any good advertising program. As you get experience you are going to be in a position to create an increasing number of experimentations on your design with new ideas. If you’re thinking about building your own vardo, here are some suggestions that may provide help.

Best Gipsy Wagon Design Ideas To Inspire You 01

Best Gipsy Wagon Design Ideas To Inspire You 02

Best Gipsy Wagon Design Ideas To Inspire You 03

Best Gipsy Wagon Design Ideas To Inspire You 04

Best Gipsy Wagon Design Ideas To Inspire You 05

Best Gipsy Wagon Design Ideas To Inspire You 06

Best Gipsy Wagon Design Ideas To Inspire You 07

Best Gipsy Wagon Design Ideas To Inspire You 08

Best Gipsy Wagon Design Ideas To Inspire You 09

Best Gipsy Wagon Design Ideas To Inspire You 10

Best Gipsy Wagon Design Ideas To Inspire You 11

Best Gipsy Wagon Design Ideas To Inspire You 12

Best Gipsy Wagon Design Ideas To Inspire You 13

Best Gipsy Wagon Design Ideas To Inspire You 14

Best Gipsy Wagon Design Ideas To Inspire You 15

Best Gipsy Wagon Design Ideas To Inspire You 16

Best Gipsy Wagon Design Ideas To Inspire You 17

Best Gipsy Wagon Design Ideas To Inspire You 18

Best Gipsy Wagon Design Ideas To Inspire You 19

Best Gipsy Wagon Design Ideas To Inspire You 20

Best Gipsy Wagon Design Ideas To Inspire You 21

Best Gipsy Wagon Design Ideas To Inspire You 22

Best Gipsy Wagon Design Ideas To Inspire You 23

Best Gipsy Wagon Design Ideas To Inspire You 24

Best Gipsy Wagon Design Ideas To Inspire You 25

Best Gipsy Wagon Design Ideas To Inspire You 26

Best Gipsy Wagon Design Ideas To Inspire You 27

Best Gipsy Wagon Design Ideas To Inspire You 28

Best Gipsy Wagon Design Ideas To Inspire You 29

Best Gipsy Wagon Design Ideas To Inspire You 30

Best Gipsy Wagon Design Ideas To Inspire You 36

Best Gipsy Wagon Design Ideas To Inspire You 37

Best Gipsy Wagon Design Ideas To Inspire You 44

Best Gipsy Wagon Design Ideas To Inspire You 45

Best Gipsy Wagon Design Ideas To Inspire You 46

If you would like to have something new and attractive as a logo or wish to provide a new face to the logo of your business, you’ll find Logo Design Studios that is sure to assist you in obtaining a new appearance for your logo. It will ensure that the logo of your business is different, unique and appealing to your potential customers. Don’t be concerned though, it’s still among the lowest investment business ideas you’ll be able to imagine!

Logo designing is an art if you need to brand yourself well then you need to have to get a professional for custom logo designing. You’re able to further raise the designs by integrating various kinds of animations. A logo design can help you to improve your professional image, make a fantastic impression on prospective clients and allow you to construct a respectable brand in the long run.

Logo design is just one of the most thought-provoking and stimulating areas of the graphic design market. More so, the tool should give the advantages of designing many designs simultaneously. In the last design stages, a last high quality check can be run.

As soon as you have opted to open up your very own independent bakery or cake shop, among the very first things that you’ll need to organize is a logo design. If you have not had the chance to pay a visit to Music City and have the ambience along Broadway, whether upper or lower or everything between, I strongly suggest it.

Not certain what you think is gimmicky regarding the designer shop. It is a good idea to keep the array of colors utilized in the design to a minimum. The best method to receive a reasonably priced logo design that’s been designed from scratch especially for your flower shop is to order a single online.

Original article and pictures take http://amzgtrvl.com/index.php/2018/12/06/46-best-gipsy-wagon-design-ideas-to-inspire-you/ site

понедельник, 26 марта 2018 г.

DIY Wood Pallet Cat House

If anyone has a pet cat, but don’t have enough money to buy a cat house for him/her; then it is not a big issue because anyone can make it at home by arranging the wood pallets. For the preparation of DIY wood pallet cat house, you need the saw for cutting the pallets according to the size required. Don’t miss any tool needed for the creation of a cat house which includes nails, hammer, drill and sander etc. Missing a single tool can irritate a person in completing a cat house made with recycled pallets.

First of all, cut the pallets using a saw and use the drill to make the holes to attach the pallets with the help of screws. Prepare the outermost structure of the wooden pallets cat house and attach the stairs with it.

After making the boundary of the cat house and the hut shape roof using the pallets, start filling the roof with the recycled pallets. You can make a single floor, but the double floor like the presented cat house is better because it not only looks nice; but gives a place to the cat to sit other than sitting inside his/her house.

Cut the pallets in less width than the recycled pallets for the house roof and use them to make the door of the house, you can pin the nails with the help of a hammer as the pallets are less in width; so they can be easily pinned.

Cover the remaining area of the cat house with the pallets and you can decorate the house by adding the cats made from pallets cutting and smoothing the edges with a sander. You can see the cat house presented which is perfectly created for the four-legged friend.

Original article and pictures take https://www.woodpalletsfurniture.com/diy-projects/diy-wood-pallet-cat-house/ site

вторник, 20 марта 2018 г.

Domus project 031: Cellar window (part I)

#architecture #basement #bricks #cellar #iron #miniature #railings #window (show more)

Original article and pictures take http://wernerio.deviantart.com/art/Domus-project-031-Cellar-window-part-I-498413267 site

четверг, 15 марта 2018 г.

How-To: MP3 Music Box

When I was a kid, my grandmother had a charming wind up music box that plucked the tune “Edelweiss” when you opened the lid. I was so fascinated by the mechanics inside the little box that I had spent a lot of time watching the movement turn.

I decided I wanted to do a modern-day maker’s riff on the old mechanical music box. I asked around for some advice on how to do it and got a lot of great suggestions such as using an Arduino Wave Shield, an MP3 trigger board, or my favorite idea, one of those electronic musical greeting cards. But I happened upon a $6 knockoff MP3 player that started playing songs when you flipped a switch on the side. When I opened it up, I was delighted to see that I could easily stop and start the music by opening and closing the circuit between the battery and the MP3 player’s circuit board.

Using a snap action switch inside a cigar box, I was able to control the music by opening and closing the lid, just like with a mechanical music box. The main difference being that my MP3 player would start the song over again after closing and reopening the box, which didn’t bother me. I found a pair of cheap speakers that had a headphone jack so that I could easily plug them into the MP3 player.

I wanted to be able to access the MP3 player as a data drive and charge it up without awkwardly plugging a cable into the MP3 player directly, so I added a panel mount female USB B jack to the back of the box and plugged it into the MP3 player inside the box. Loading songs into the music box becomes a cinch when you just plug the USB cable from your computer into the back of the box and then drag the files to the drive.

The MP3 Music Box makes a great, customized gift for anyone. You can see in the video that I turned mine into a Wii Remote box and added 8-bit video game style music to it. You could add romantic music if you make the box for your partner for Valentines Day, or lullabies if you make it for a child’s nightstand. Whatever it is, there’s no doubt that this whimsical electronic music box will surprise and delight the recipient.

Subscribe to the MAKE Podcast in iTunes, download the m4v video directly, or watch it on YouTube and Vimeo.

Original article and pictures take https://makezine.com/2011/02/14/mp3-music-box/ site

понедельник, 12 марта 2018 г.

Get Ready... Something Really Cool Is Coming Soon

Provide Some Basic Info

Just getting started? Our in-house CAD design team can help you choose the best options & pricing.

-- SELECT -- Alabama Alaska Arizona Arkansas California Colorado Connecticut Delaware District of Columbia Florida Georgia Hawaii Idaho Illinois Indiana Iowa Kansas Kentucky Louisiana Maine Maryland Massachusetts Michigan Minnesota Mississippi Missouri Montana Nebraska Nevada New Hampshire New Jersey New Mexico New York North Carolina North Dakota Ohio Oklahoma Oregon Pennsylvania Rhode Island South Carolina South Dakota Tennessee Texas Utah Vermont Virginia Washington West Virginia Wisconsin Wyoming

Since 2003 our mission has been to create unique, on-budget wine cellars that let the personality of their owner shine through.

Our design team embraces a true passion for cellaring & displaying wine. We listen to your goals and suggest practical ways to achieve them.

View the design gallery ›

Quality Materials

Achieve the look and feel you want with a wide range of building materials

modular design | beautiful results | made in the USA

Add WineSafe™ stains and finish

Original article and pictures take http://www.wineracksamerica.com/wine-cellar-design/?pp=0 site

How to Build a Squirrel House

Many homeowners and garden enthusiasts do not appreciate squirrels. One way to protect your garden or your birdhouse is to provide a sanctioned area for squirrels. A squirrel house, built properly, will encourage squirrels to stay in their area and out of yours. A squirrel house, like a bird house, is used to feed and shelter squirrels.

1 Gather your tools. This is a basic woodwork project and doesn’t require anything too elaborate. You’ll need a saw (jig-saw if you have one), electric screwdriver, and screws (3-4 dozen). If you don’t have an electric screwdriver, you could also use a hammer and nails. Screws hold the squirrel house’s design more securely than nails. Keep the following on hand as well:
- Measuring tape
- Pencil and paper
- First aid kit
- Sandpaper
2 Gather wooden boards. Scrap lumber will work just fine for this project. Exterior grade plywood could be used, but this material is easier for the squirrels to damage. Two boards should be 12” x 12” or larger to be used as the floor, roof and overhang. You’ll also need two additional 35” x 6”.
- The six is based off the average squirrel size. If you notice larger species such as Red or Grey squirrels, use a wider size wood. Use something between 6” and 10”
- You don’t need to follow these exact dimensions, if you acquired enough scrap wood.
3 Create the front and back panels. The key to a good squirrel house is for the roof to overhang slightly. To achieve this, the front board should be one inch shorter than the back board. Use your measuring tape to mark 18” on one board and 17” on another board. Draw legible and straight lines with your pen across the board.
- Use your saw and cut along the line in an even fashion. Take your time sawing. A good cut is better than a quick and choppy cut.
- Again these are the measurements for this squirrel house. You can make your house smaller, but don’t make it bigger. Squirrels enjoy compact spaces.
4 Create your side walls. The sides must be the same width as the front and back panels. The side panels require a more advanced cut. You’ll need to measure 18” on one edge and 17” on the other edge.^[1] Each plank's top will be cut into a slanted edge. Use your measuring tape to mark the right measurements.
- Draw a line to connect the 18” marker to the 17” marker. Use a ruler to create a straight and even line.
- Take your time to create a clean cut with your saw. You should now be able to see the panels align with the front and back walls.
5 Create a doorway. Now you need to create an entrance for the squirrels to use. Take one of the side panels and measure three inches from the 18” side. Use the 3” mark to create a hole that is 3” in diameter. You’re basically removing the pointed edge of a side board.
- It doesn’t need to be exactly three inches in diameter, but should be close. The hole size determines what species can fit into the house.^[2] People have reported possums n their “squirrel house,” because the opening was too large.
6 Attach the walls. Start by positioning all the walls in place using your hands. Make sure all the front and rear edges align with the proper sides. Once you’re pleased by the outline, it’s time to attach the walls. Attach everything in the following order:
- Position the front wall (17”) with a side wall. Place the side panel’s edge in front of the front panel’s edge. Insert 4-7 evenly spaced nails or screws to attach the two.
- Attach the side panel that is attached to the front wall to the back wall (18"). Again, the nail or screws should pass through the side wall before going through the rear wall’s edge.
- Attach the other side board onto the house. For each corner, you should use between 4-7 screws or nails.
- If you are using an electric screwdriver, take your time. It is easy to damage the wood if you try to work too quickly.
7 Connect the flooring. Use one of the 12” x 12” boards as flooring for the squirrel house. Position the frame created in the previous step on top of the 12” x 12”. Align the 18” wall along the edge of the floor board. Center the frame and mark where the corners will be on the floor.
- Flip the frame to begin attaching the nails and screws. Attach nails or screw into each corner. Use between 3-4 screws or nails for each side.
- Be careful to only attach the nails or screws along the house’s frame.
8 Fill the house. Some builders like to insert a wooden divider into the house with a 3” gap to create two stories. Squirrels like to play in compact spaces. Make it comfortable for the squirrels by adding pillow fluff or the contents of a stuffed animal. Another good bedding material is dried moss found in nature or a craft store.^[4]
- Measure the inner dimensions to create a floor divider for the house. Cut out a 3” hole as you did with the entrance to the house.
- Hold the floor divider and have somebody assist you with attach it with a nail or screw. The set of helping hands will attach the screw through the exterior wall into the divider.
- It’s okay if there are gaps between the floor divider and the walls. This doesn’t need to be as tight as the exterior structure.
9 Attach the roof. Use the extra 12” x 12” as the roof. Align the edge of the 12” x 12” to the backside of the roof (18” wall). You’ll need to hold the wooden board in place as you nail or screw in the roof. There should be an overhang on the front of the house.^[5]

1 Scout your yard. Plan to spend a day watching your yard to witness how active the squirrels are. Take mental notes of certain trees you see multiple squirrels pass through. Pick out one of the trees that you think will hold that house.
- To promote squirrel activity, choose a location that is 10 to 30 feet off the ground.^[6] The higher the house is, the more likely squirrels will occupy it.
2 Create a grip. You will need two large nails to create a stable grip for the squirrel house. Use a secure and long ladder to reach the desired spot for the house. Have a partner around to spot you for safety measures. Drive the first nail into the tree with a hammer, but leave an inch exposed. Take the second nail and drive that about eight inches parallel to the first nail. Leave an inch of the second nail exposed.
- The squirrel house should fit in between the two nails.
3 Wrap the squirrel house. You will tighten the squirrel house to the tree by tightening a thick wire around the house and tree. Make sure you use strong wire that has tightening abilities. You could also tie the wire together and tighten with pliers, but this may prove dangerous at such a height.
- Go to a local hardware store and ask about thick gauged wired that can be tightened easily. They will have something that will work.
4 Mount the squirrel house. Fit the squirrel house between the two nails previously inserted into the tree. The goal is to have the nails fit the house’s width in a snug manner. Then use the wire from the previous step to secure the squirrel house.
5 Add food. Squirrels are easy to attract once you’ve provided a shelter for them. Squirrels enjoy the same foods that birds like. This is a reason why squirrels invade your bird-feeders. You could use bird food or any of the following:

Original article and pictures take https://www.wikihow.com/Build-a-Squirrel-House site

понедельник, 26 февраля 2018 г.

Gothic-inspired pool house in Nashville showcases a cellar for wine-lovers

This stunning pool house and wine cellar project was designed by interior design studio Beckwith Interiors, located in Nashville, Tennessee. In addition to being an interior designer and creating her product line, Jamie has a showroom in Nashville where she has curated design products that are unique, beautiful and innovative. The pool house was designed on the grounds of her own house which is a Gothic-style estate, as a place for her out-of-town guests to stay and as an entertaining area for family barbeques and hosting charity events.

Beckwith used the pool house as an opportunity to experiment with innovative ideas that she had contrived as well as incorporating unique products that she has designed. The house is chock-full of unexpected textures, which includes wood tile flooring, murals, travertine walls and furnishings and rugs that can withstand three young children and guests that are damp from a dip in the pool. The interiors feature Gothic touches which are inspired by the main house, which is a more traditional Gothic style. The pool house has been more modernized with touches of Gothic mixed with cleaner lines.

contemporary-kitchen — Above: The vibrant yellow kitchen counters are 3-Form Chroma in Marigold Yellow, a resin that is under-lit, found here.

What We Love: This amazing pool house is spread out over three levels, offering everything a guest could need to feel pampered and right at home. Beautifully design spaces offers luxurious touches, including the striking walnut freestanding tub in one of the women’s bathrooms. With separate bathrooms catered to men and women, a steam room can accommodate all guests. This fully equipped pool house offers a spacious kitchen, living / dining room and a formal sitting area with a glass floor overlooking a fabulous wine cellar!

Readers, please share with us in the Comments what you think of this incredible pool house and wine cellar. We here at One Kindesign would love to read your feedback!

Above: Most of the fabrics used throughout the pool house are indoor/outdoor, so guests keep their wet bathing suits on when they sit on the furnishings. The flooring is an epoxy, impervious to scratches and staining.

contemporary-dining-room — Above: The floor is covered with an ivory patched-cowhide rug that can take abuse from wet feet, perfect for a pool house.

Above: This mosaic wall is made from western red cedar called “Projection,” it’s another product that Jamie created for her collection.

Above: Large-scale artwork was selected for their graphic nature and to add bold punches of yellow throughout as well as to match the proportions of the large walls and open floor plan.

Above: This staircase continues the Gothic style with a solid wood railing that incorporates dramatic spires. The circles under the hand rail and the custom acrylic light adds modern touches to this traditional style.

Above: The wine cellar was designed so that it could be viewed from above, so all details had to look good from every viewing angle. The wood had to be finished from above and lighting wiring had to be tucked away. The glass floor has a retractable screen when not entertaining to minimize light exposure on the wine.

Above: A maximum of 2,000 bottles can be stored in these futuristic Gothic arches, composed of acrylic and illuminated by LED lighting. The material used on the floor is called Mosaic, a patterned wood block that is finished after installation.

eclectic-living-room — Above: This nook just off the wine cellar is used mainly as a cozy spot for wine tastings.

contemporary-bathroom — Above: This large bathroom is on the main level with the living area and kitchen, perfect for rinsing off after a swim.

Above: The bathtub is solid walnut with birdseye maple inlay trim, another of Jamie’s creations. The tub is inspired by luxury wooden yachts, made entirely of wood and sanded with several layers of polyurethane for a shiny, smooth finish.